Removal and Replacement
GeneratorREMOVAL
1. Remove the V-belt covers.
2. Disconnect the ground cable from battery.
3. Remove the V-belts.
4. Remove the V-belt cover bracket.
5. Disconnect the connector (A) and terminal (B) from the generator.
6. Remove the idler pulley from the chain cover.
7. Remove the generator from the bracket.
8. Remove the generator bracket from the generator.
INSTALLATION
1. Temporarily install the generator bracket to the generator.
2. Temporarily install the generator to the engine.
3. Tighten the generator and generator bracket in the numerical order.
Tightening torque:
T1: 25 N.m (2.5 kgf-m, 18.4 ft-lb)
T2: 36 N.m (3.7 kgf-m, 26.6 ft-lb)
4. Install the V-belt cover bracket and tighten the bolts in the numerical order.
Tightening torque:
T1: 8.5 N.m (0.9 kgf-m, 6.3 ft-lb)
T2: 36 N.m (3.7 kgf-m, 26.6 ft-lb)
5. Install the idler pulley to the chain cover.
Tightening torque: 36 N.m (3.7 kgf-m, 26.6 ft-lb)
6. Connect the connector (A) and terminal (B) to the generator.
Tightening torque: 16 N.m (1.6 kgf-m, 11.8 ft-lb)
7. Install the V-belts.
8. Connect the battery ground terminal.
9. Install the V-belt cover.
Tightening torque: 13 N.m (1.3 kgf-m, 9.6 ft-lb)
