Clearing Diagnostic Trouble Codes
Clear Memory ModeOPERATION
1) On [[Main Menu]] display, select {Each System Check}.
2) On [[System Selection Menu]] display, select {Power Steering System}.
3) On [[Power Steering Diagnosis]] display, select {Clear Memory}.
4) When [[Done]] and [[Turn off the ignition switch.]] are shown on the display screen, turn the Subaru Select Monitor and the ignition switch to OFF.
NOTE:
^ Before performing memory clear, check the current data, and if there are any data of DTC, trouble status information, overheating protection intervention history, IGN count from overheating protection and assist limit history, save them.
^ For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".