Installation

INSTALLATION

1) Before installation, inspect the following items and replace any faulty part with a new one.
^ Check the bushing - stabilizer for abnormal cracks, fatigue or damage.
^ Check the stabilizer link assembly for damage.
2) Install each part in the reverse order of removal.

CAUTION:
Install the clamp - stabilizer bushing with the arrow mark facing the front of the vehicle.





Tightening torque:
Clamp - stabilizer bushing: 25 Nm (2.55 kgf-m, 18.4 ft-lb)
Stabilizer link assembly: 38 Nm (3.87 kgf-m, 28.0 ft-lb)
Front crossmember support - front crossmember assembly: 60 Nm (6.12 kgf-m, 44.3 ft-lb)
Under cover - front: 17.5 Nm (1.78 kgf-m, 12.9 ft-lb)

3) Install the front wheels.

Tightening torque:
120 Nm (12.24 kgf-m, 88.5 ft-lb)