Engine Controls - DTC's P0017 And P0019 Set
NUMBER: 11-128-13DATE: 02/08/13
APPLICABILITY:
2012MY Impreza with 2.0L NA FB Engine
SUBJECT:
ECM Reprogramming for DTCs P0017 and P0019
INTRODUCTION
This Bulletin announces the availability of ECM reprogramming to address DTCs P0017 and P0019.
PACK FILE APPLICABILITY
NOTE:
SSMIII version 1.36.50.7 dated January, 2013 (or newer) is required to install these updates and perform the Service Procedure outlined in this bulletin.
SERVICE PROCEDURE
When P0017 and/or P0019 is stored:
^ Reprogram the ECM
^ Perform Inspection Mode
^ Did any DTCs reset?
YES - Replace the ECM with the latest part number
NO - The procedure is complete
ACCESSING INSPECTION MODE
Using the Service Diagnostics tab on the STIS home page, enter your vehicle search parameters (example: 2012 > Impreza). Next, enter the specific DTC into the search term box. Select the applicable link from your search result (example: ENGINE (DIAGNOSTICS) (H4DO) > Inspection Mode > PROCEDURE). Follow the procedure as outlined to completion.
WARRANTY / CLAIM INFORMATION
For vehicles within the Basic New Car Limited and / or Emissions Warranty period, this repair may be claimed using the information shown.
Disclaimer