Removal
Select LeverREMOVAL
1) Shift the select lever to "N" range.
2) Disconnect the ground cable from battery.
3) Lift up the vehicle.
4) Remove the rear exhaust pipe.
5) Remove the center exhaust cover.
6) Disconnect the cable from the arm COMPL.
7) Raise the claw of clamp and remove the cable.
8) Lower the vehicle.
9) Shift the select lever to "N" range.
10) Lower the cover grip AT vertically toward the lever.
11) Remove the clamp grip pin.
12) Remove the grip assembly.
13) Remove the console box.
14) Remove the cover - shift lever.
15) Disconnect the connector, and remove the indicator cover from the housing.
16) Remove the housing with the blind A and blind B.
17) Remove the blind B.
18) Remove the blind A from the housing.
19) Remove the harness clip from the select lever.
20) Disconnect the harness connector.
21) Remove the four bolts to remove the select lever assembly.
