Removal

Transmission Mounting System

REMOVAL

PITCHING STOPPER

1) Disconnect the ground cable from battery.
2) Remove the air intake boot.
3) Remove the pitching stopper.





CROSSMEMBER AND CUSHION RUBBER

1) Disconnect the ground cable from battery.
2) Lift up the vehicle.
3) Remove the center exhaust pipe.
4) Remove the center exhaust cover.





5) Set the transmission jack under the transmission body.

CAUTION:
Always support the transmission case with a transmission jack.

6) Remove the front crossmember and the rear crossmember.





7) Remove the transmission cushion rubber.