Clearing Reading Diagnostic Trouble Codes
Clear Memory ModeOPERATION
1) Shift the select lever to "P" range.
2) Using the Subaru Select Monitor, on the [[Main Menu]] display, select {Each System Check}.
3) On [[System Selection Menu]] display, select {Transmission Control System}.
4) After transmission type information is displayed, select [OK].
5) On [[Transmission Diagnosis]] display, select {Clear Memory}.
6) When [[Done Turn Ignition Switch OFF]] is displayed, select [OK].
7) Turn the ignition switch to OFF. To turn the ignition switch to ON again, wait for 10 seconds or more.
8) Turn the Subaru Select Monitor to OFF.
CAUTION:
^ If {Clear Memories 2} is executed, learned control memory are cleared.
^ If {Clear Memories 2} is executed, perform learning. Programming and Relearning