Reading Diagnostic Trouble Codes

Read Diagnostic Trouble Code (DTC)

OPERATION

1) Using the Subaru Select Monitor, on the [[Main Menu]] display, select {Each System Check}.
2) On [[System Selection Menu]] display, select {Transmission Control System}.
3) After transmission type information is displayed, select [OK].
4) On [[Transmission Diagnosis]] display, select {Diagnostic Code(s) Display}.
5) On [[Diagnostic Code(s) Display]] display, select {Temporary Diagnostic Code(s)} or {Memorized Diagnostic Code(s)}.

NOTE:
^ For details concerning the work procedure, refer to the "PC application help for Subaru Select Monitor".
^ For details concerning DTC, refer to List of Diagnostic Trouble Code (DTC). List of DTC