Overhaul

Wiper Blade

DISASSEMBLY

1. FRONT
Pull side (A) of the wiper rubber stopper, and remove the rubber assembly - windshield wiper from the blade assembly - windshield wiper.






2. REAR
Slightly pull the top of the rubber assembly - rear wiper from the stopper (A), and pull out completely.






ASSEMBLY

1. FRONT
1. Insert the rubber assembly - windshield wiper onto the blade - windshield wiper so that the stopper is in the position shown in the figure.






2. Make sure the rubber assembly - windshield wiper is securely fastened to the pull stopper (A).






2. REAR

1. Insert the rubber assembly - rear wiper into claw (B).






2. Insert the rubber assembly - rear wiper until its top end protrudes approx. 20 mm (0.79 in) from stopper (D).
3. Insert the rubber assembly - rear wiper into claw (A).