> display, select {Each System Check}.
2. On <> display, select {Engine Control System}.
3. Select [OK] after the information of engine type is displayed.
4. On <> display, select {Clearing Memory}.
5. When "Done" is displayed on the display, end the Subaru Select Monitor and turn the ignition switch to OFF.

NOTE:
- After the memory is cleared, initial diagnosis of the electronic throttle control is performed. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.
- For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".

2. BODY INTEGRATED UNIT
1. On <

> display, select {Each System Check}.
2. On <> display, select {Integ. Unit}.
3. After {Integ. unit} is displayed, select [OK].
4. On <> display, select {Clearing Memory}.
5. When "Done" is displayed on the display, end the Subaru Select Monitor and turn the ignition switch to OFF.

NOTE: For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".