Trunk Lid Latch and Actuator Assembly

Trunk Lid Latch and Actuator Assembly

REMOVAL
1. Disconnect the ground cable from battery.
2. Disconnect the harness connector to remove the trunk opener cable.
3. Remove the bolts, and remove the trunk lid latch&actuator assembly.






INSTALLATION
Install each part in the reverse order of removal.

Tightening torque:
T1: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
T2: 25 N.m (2.55 kgf-m, 18.4 ft-lb)

NOTE: Apply grease to the movable part.