Inspection

INSPECTION

Before performing diagnosis, check the following items which might affect VDC problems.

BATTERY

Measure the battery voltage and check electrolyte.

Standard voltage:
12 V or more

Specific gravity:
1.260 or more

GROUND

Check the tightening torque of ground (GB-5) bolt of VDC.

Tightening torque:
13 Nm (1.3 kgf-m, 9.6 ft-lb)

BRAKE FLUID

1) Check the brake fluid level.
2) Check the brake fluid for leaks.

HYDRAULIC UNIT

Check the hydraulic unit.
- When using the brake tester Testing and Inspection
- When not using the brake tester Testing and Inspection

BRAKE DRAG

Check for brake drag.

BRAKE PAD AND ROTOR

Check the brake pad and rotor.
- Front Front Front
- Rear Rear Rear

TIRES

Check the tire specifications, tire wear and air pressure.