Headlamp: Testing and Inspection

Headlight Beam Leveler System

INSPECTION

1. HEADLIGHT BEAM LEVELER ACTUATOR
1. Turn on the headlight beam.
2. Change the switch position in the order of 0 -> 1 -> 2 -> 3 -> 4 -> 5, and check that the headlight beam position is lowered.

2. HEADLIGHT BEAM LEVELER SWITCH
1. Connect the circuit tester to the battery and headlight beam leveler switch connector.
2. Check the voltage at each switch position.






3. Replace the headlight beam leveler switch if the inspection result is not within the standard value.