Horn: Service and Repair

Horn

REMOVAL
1. Disconnect the ground cable from battery.
2. Remove the front bumper face.
3. Disconnect the harness connector.
4. Remove the horn bracket mounting bolt, and remove the horn assembly.






INSTALLATION
1. Install each part in the reverse order of removal.

Tightening torque:
LO side: 18 N.m (1.84 kgf-m, 13.3 ft-lb)
HI side: 13 N.m (1.33 kgf-m, 9.6 ft-lb)

2. Adjust the fog light beam. (Model with fog light)