Air Injection Control Valve: Service and Repair
Secondary Air Combination ValveREMOVAL
SECONDARY AIR COMBINATION VALVE LH
1. Disconnect the ground cable from battery.
2. Remove the intercooler.
3. Disconnect the connector from the secondary air combination valve LH.
4. Disconnect the air duct A.
5. Remove the secondary air pipe LH.
6. Remove the secondary air combination valve LH.
SECONDARY AIR COMBINATION VALVE RH
1. Disconnect the ground cable from battery.
2. Remove the intercooler.
3. Remove the intake manifold.
4. Disconnect the air duct A.
5. Disconnect the secondary air pipe RH.
6. Remove the secondary air combination valve RH.
INSTALLATION
SECONDARY AIR COMBINATION VALVE LH
Install in the reverse order of removal.
NOTE: Use a new gasket.
Tightening torque:
T1: 9 N.m (0.9 kgf-m, 6.6 ft-lb)
T2: 19 N.m (1.9 kgf-m, 14.0 ft-lb)
SECONDARY AIR COMBINATION VALVE RH
Install in the reverse order of removal.
NOTE: Use a new gasket.
Tightening torque:
T1: 9 N.m (0.9 kgf-m, 6.6 ft-lb)
T2: 19 N.m (1.9 kgf-m, 14.0 ft-lb)
