Fuel Pump Control Unit: Service and Repair
Fuel Pump Control UnitREMOVAL
1. Disconnect the ground cable from battery.
2. Remove the right side trunk side trim. (4 door model)
3. Remove the right side rear quarter trim. (5 door model)
4. Disconnect the connector (A) from the fuel pump control unit, and remove the fuel pump control unit.
- 4 door model
- 5 door model
INSTALLATION
Install in the reverse order of removal.
Tightening torque: 5 N.m (0.5 kgf-m, 3.7 ft-lb)