Component Tests and General Diagnostics
Function CheckOPERATION
NOTE: In order to check the body integrated unit function, inspect the body integrated unit and actuator using Subaru Select Monitor without operating switches.
1. On [Main Menu] display, select {Each System Check}.
2. On [System Selection Menu] display, select {Integ. unit mode}.
3. On [Integ. unit mode failure diag.] display, select {Function check}.
4. Select an item to be operated on [Function check] display, and press the [OK] button.
5. Pressing [Next] starts, [End] cancels the operation and [OK] returns to the System Operation Check Mode display screen.
NOTE:
- If not equipped (based on area or condition), process will not go on.
- For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".