Belt Cover

Timing Belt Cover

REMOVAL

NOTE:
When replacing a single part, perform the work with the engine assembly installed to body.

1) Remove the crank pulley.
2) Remove the stopper rod.





3) Remove the timing belt cover LH (A).
4) Remove the front timing belt cover (B).





INSTALLATION

1) Install the front timing belt cover (B).

Tightening torque:
5 Nm (0.5 kgf-m, 3.7 ft-lb)

2) Install the timing belt cover LH (A).

Tightening torque:
5 Nm (0.5 kgf-m, 3.7 ft-lb)





3) Install the stopper rod.

Tightening torque:
36 Nm (3.7 kgf-m, 26.6 ft-lb)





4) Install the crank pulley.

INSPECTION

Check that the timing belt cover does not have deformation, cracks and any other damage.