Crankshaft Main Bearing
Cylinder Block10 mm bolts on the LH side (A - D) 10 Nm (1.0 kgf-m, 7.4 ft-lb)
10 mm bolts on the RH side (E - J) 10 Nm (1.0 kgf-m, 7.4 ft-lb)
Bolts (A - D) 18 Nm (1.8 kgf-m, 13.3 ft-lb)
(E - J) 18 Nm (1.8 kgf-m, 13.3 ft-lb)
A and C Tightening angle 90°
B and D Torque tightening 40 Nm (4.1 kgf-m, 29.5 ft-lb)
(E - J) Tightening angle 90°
8 mm and 6 mm bolts on the LH side (A - H)
(A) - (G) 25 Nm (2.5 kgf-m, 18.4 ft-lb)
(H) 6.4 Nm (0.7 kgf-m, 4.7 ft-lb)
Main Bearing
Oil clearance Standard 0.010 - 0.030 mm (0.0004 - 0.0012 in)
Bearing Size
#1, #3
Standard 1.998 - 2.011 (0.0787 - 0.0792)
0.03 (0.0012) US 2.017 - 2.020 (0.0794 - 0.0795)
0.05 (0.0020) US 2.027 - 2.030 (0.0798 - 0.0799)
0.25 (0.0098) US 2.127 - 2.130 (0.0837 - 0.0839)
#2, #4, #5
Standard 2.000 - 2.013 (0.0787 - 0.0793)
0.03 (0.0012) US 2.019 - 2.022 (0.0795 - 0.0796)
0.05 (0.0020) US 2.029 - 2.032 (0.0799 - 0.0800)
0.25 (0.0098) US 2.129 - 2.132 (0.0838 - 0.0839)