Cylinder Head Assembly

Cylinder Head

In alphabetical order

Tighten all bolts 40 Nm (4.1 kgf-m, 29.5 ft-lb)
Retighten all bolts 95 Nm (9.7 kgf-m, 70.1 ft-lb)

Loosen all bolts 180°
Loosen them further 180°

Tighten all bolts 10 Nm (1.0 kgf-m, 7.4 ft-lb) .
Retighten all bolts 30 Nm (3.1 kgf-m, 22.1 ft-lb)
Retighten all bolts 60 Nm (6.1 kgf-m, 44.3 ft-lb) in alphabetical order.
Retighten all bolts 80 - 90°
Retighten all bolts 40 - 45°
Tightening angle not exceed 45°.
Retighten bolts (a) and (b) 40 - 45°.

Total tightening angle not to exceed 90°





Warping limit 0.035 mm (0.0014 in)

Camshaft cap

Bolts (a) through (d) Temporarily tighten





Bolts (e) through (j) 18 Nm (1.8 kgf-m, 13.3 ft-lb)





Bolts (k) through (r) 9.75 Nm (1.0 kgf-m, 7.2 ft-lb)





Bolts (s) and (t) 9.75 Nm (1.0 kgf-m, 7.2 ft-lb)





Camshaft Gear/Sprocket Specifications