Preparation For Overhaul

Preparation for Overhaul

GENERAL DESCRIPTION

Before disassembling and assembling the transmission, follow the following procedures to prepare.

PROCEDURE

1) Clean the transmission exterior.
2) Remove the torque converter assembly.
3) Attach the ST on the transmission.
ST 18632AA000 STAND ASSY





4) Remove the transmission cover on the transmission upper side.

NOTE:
Install using the following tightening torque.

Tightening torque:
8 Nm (0.8 kgf-m, 5.9 ft-lb)





5) Place the transmission assembly on end.