User Customizing
User CustomizingOPERATION
1. On [Main Menu] display, select {Each System Check}.
2. On [System Selection Menu] display, select {Integ. unit mode}.
3. On [Integ. unit mode failure diag.] display, select {Unit customizing}.
4. Change the setting with UP/DOWN key and set with the [OK] key.
5. After setting, make sure that the setting changed in the {Current Data Display & Save} is same as vehicle equipment.
List of User Customizing item
CAUTION:
- The above settings must match the actual vehicle equipment.
- Do not change settings except for setting above while setting the functions.
- Be sure not to change Factory initial setting except when installing a new body integrated unit.
NOTE: For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".