How to Use This Manuals
HOW TO USE THIS MANUALS1. STRUCTURE
Each section consists of SCT that are broken down into SC that are divided into sections for each component. The specification, maintenance and other information for the components are included, and the diagnostic information has also been added where necessary.
2. CONTENTS
The first page has an index with tabs.
3. COMPONENT
Illustrations are provided for each component. The information necessary for repair work (tightening torque, grease up points, etc.) is described on these illustrations. Information is described using symbol.
To order parts, refer to parts catalogue.
Example:
4. DEFINITION OF "NOTE", "CAUTION" AND "WARNING"
- NOTE: Describes supplementary explanations for efficient operation.
- CAUTION: Describes particular items to be followed and items to be prohibited to avoid vehicle or parts damage.
- WARNING: Describes items to be strictly prohibited to avoid serious injury to the person doing the work or people in the area, and items to be strictly followed to avoid any deficiency or accident.
5. SPECIFICATION
If necessary, specifications are also included.
6. INSPECTION
Inspections to be carried out before and after maintenance are included.
7. MAINTENANCE
- Maintenance instructions for serviceable parts describe work area and detailed step with illustration. It also describes the use of special tool, tightening torque, caution for each procedure.
- If many serviceable parts are included in one service procedure, appropriate reference is provided for each parts.
Example:
8. DIAGNOSIS
Diagnosis uses step-by-step process to make operations easier.
9. SI UNITS
Measurements in these manuals are according to the SI units. Metric and yard/pound measurements are also included.
Example:
Tightening torque: 44 N.m (4.5 kgf-m, 33 ft-lb)
List of SI unit
The figure used in these manuals are described in the SI units and conventional units are described in ( ).
10. EXPLANATION OF TERMINOLOGY
LIST
