Solar Sensor: Testing and Inspection
Sunload Sensor (Auto A/C Model)INSPECTION
Preparation tool: Subaru Select Monitor III KIT
1. Check if there is anything that affects sensing, around the sunload sensor.
1. Is there anything placed on the sunload sensor that disturbs sensing?
2. Is there anything on the windshield glass, such as sticker and film, that disturbs sensing?
- No --> Go to step 2).
- Yes --> Remove everything that affects sensing.
2. Check the sunload sensor using the Subaru Select Monitor.
1. Prepare the Subaru Select Monitor kit.
2. Run the "PC application for Subaru Select Monitor".
3. On <
4. On <
5. On <
6. Select {Quantity of Sunload} with UP/DOWN key and set with the [OK] key.
7. Cover the sunload sensor with cloth and the like to avoid direct light. Does {Quantity of Sunload} indicate 0 sq.W/m
- Yes --> Go to step 3).
- No --> Replace the sunload sensor.
3. From step 2), expose the sunload sensor to light.
1. Place intense light such as incandescent light at 30 cm or less from the sunload sensor.
2. Does the {Quantity of Sunload} indicate 2000 sq.W/m or less?
CAUTION: The value changes depending on the angle of light.
- Yes --> The sunload sensor is normal.
- No --> Replace the sunload sensor.