Cylinder Head Assembly

Cylinder Head





Tighten 20 Nm (2.0 kgf-m, 14.8 ft-lb)
Tighten 50 Nm (5.1 kgf-m, 36.9 ft-lb) in the order indicated in the figure.

Loosen all the bolts in the reverse order of installing 180°
Loosen them further 180°.

Tighten all bolts 20 Nm (2.0 kgf-m, 14.8 ft-lb)
Tighten bolts (1) - (4) 48 Nm (4.9 kgf-m, 35.4 ft-lb).
Tighten bolts (5) - (8) 44 Nm (4.5 kgf-m, 32.5 ft-lb).
Tighten all bolts 90°
Tighten bolts (1) - (4) 45°


Warping limit 0.020 mm (0.0008 in)


Camshaft cap

Tightening torque (1) - (12) 16 Nm (1.6 kgf-m, 11.8 ft-lb)
Tightening torque (13) - (17) 9.75 Nm (1.0 kgf-m, 7.2 ft-lb)





Camshaft Gear/Sprocket Specifications