Installation
Rear Vehicle Speed SensorINSTALLATION
1) Install the rear vehicle speed sensor.
NOTE:
Use new O-rings.
Tightening torque:
7 Nm (0.7 kgf-m, 5.2 ft-lb)
2) Connect the rear vehicle speed sensor connector.
3) Install the heat shield cover.
4) Tighten the bolts which connect the front exhaust pipe and rear exhaust pipe.
Tightening torque:
18 Nm (1.8 kgf-m, 13.3 ft-lb)
5) Lower the vehicle.