> display, select {Each System Check}.
2. On the <>, select {Engine Control System}.
3. After engine type information is displayed, select [OK].
4. On the <>, select {Clear Memory}.
5. When "Done" is displayed on the display screen, end the Subaru Select Monitor and turn the ignition switch to OFF.

NOTE:
- Initial diagnosis of electronic throttle control is performed after memory clearance. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.
- For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".

2. BODY INTEGRATED UNIT
1. On the <

> display, select {Each System Check}.
2. On the <>, select {Integ. Unit Mode}.
3. After {Integ. Unit Mode} is displayed, select [OK].
4. On the <>, select {Clear Memory}.
5. When "Done" is displayed on the display screen, end the Subaru Select Monitor and turn the ignition switch to OFF.

NOTE: For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".