Remote Openers

Remote Openers

REMOVAL

1. FRONT HOOD OPENER
1. Remove the nuts, and remove the front hood opener lever.
2. Remove the cable from the front hood opener.






2. FUEL FILLER FLAP LID OPENER
1. Remove the second row seats.
2. Remove the third-row seats.
3. Remove the following side trims.
- Front door scuff plate LH
- Rear door scuff plate LH
- Center pillar lower trim

4. Remove the right rear quarter trim.
5. Turn over the floor mat to remove the clips securing the cable.
6. Remove the cover.
7. Remove the bolt and nut, and then detach the pull handle assembly.






8. Remove the cable from pull handle assembly.
9. Rotate the fuel lock inside the quarter panel to 90° and remove. (Either right or left turn)






INSTALLATION
Install in the reverse order of removal.

Tightening torque:
T1: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
T2: 25 N.m (2.55 kgf-m, 18.4 ft-lb)
T3: 33.0 N.m (3.36 kgf-m, 24.3 ft-lb)