Removal and Replacement

Sunroof Assembly







REMOVAL

1. Disconnect the ground cable from battery.
2. Remove the roof trim.
3. Disconnect the harness connector of sunroof motor.
4. Remove the glass lid.
5. Remove the drain tube from frame assembly.
6. Remove the bolts, and then detach the frame assembly.







INSTALLATION

CAUTION: Be careful not to snag the harness.

Install in the reverse order of removal.

NOTE:
- Be sure to connect the harness connector.
- When installing the drain tube, insert it securely into drain pipe.

Length A: 15 mm (0.59 in) or more