Fuel Tank Pressure Sensor: Service and Repair
Fuel Tank Pressure SensorREMOVAL
WARNING: Place "NO OPEN FLAMES" signs near the working area.
1. Disconnect the ground cable from battery.
2. Open the fuel filler lid and remove the fuel filler cap.
3. Lift up the vehicle.
4. Disconnect the connector from the fuel tank pressure sensor.
5. Disconnect the vacuum hose from the fuel tank pressure sensor.
6. Remove the fuel tank pressure sensor along with the bracket.
INSTALLATION
Install in the reverse order of removal.
Tightening torque: 7.35 N.m (0.7 kgf-m, 5.4 ft-lb)
