Intake Air Plenum: Service and Repair

AIR INTAKE CHAMBER

REMOVAL

1. Remove the collector cover.
2. Loosen the clamp (A) which connects air intake chamber to throttle body.
3. Loosen the clamp (B) which connects intake boot to air intake chamber.
4. Remove the bolt (C) which secures air intake chamber and collector cover bracket to the stay.






5. Disconnect the blow-by hoses, and then remove air intake chamber.

INSTALLATION

Install in the reverse order of removal.

Tightening torque:
Clamp (A), (B) : 3 N.m (0.3 kgf-m, 2.2 ft-lb)
Bolt (C) : 6.5 N.m (0.7 kgf-m, 4.8 ft-lb)