Inspection

INSPECTION

1. COMMUNICATION FOR INITIALIZING IMPOSSIBLE

DETECTING CONDITION:
Defective harness connector

TROUBLE SYMPTOM:
Communication is impossible between the airbag control module and the Subaru Select Monitor. Refer to "Initial Communication Impossible" in the DTC of the airbag system (diagnosis). Subaru Select Monitor

2. WITHOUT DTC

DETECTING CONDITION:
- Defective combination meter
- Open circuit of harness

TROUBLE SYMPTOM:
- Airbag warning light remains on.
- "No diagnostic Code Present" will be displayed on the Subaru Select Monitor.
For detailed operation procedures, refer to "Airbag Warning Light Failure". Symptom Related Diagnostic Procedures

NOTE: When the airbag warning light is OFF and "No diagnostic Code Present" is displayed on Subaru Select Monitor, the system is operating properly.