Side Airbag Sensor

Side Airbag Sensor

REMOVAL

CAUTION: Do not separate the side airbag sensor and bracket. Doing so will cause the airbag system malfunction. If the sensor is removed from the bracket, be sure to replace with a new part.

1. Turn the ignition switch to OFF.
2. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work.
3. Remove the center pillar lower trim.
4. Remove the seat belt retractor of the front outer seat belt.
5. Remove the nut and disconnect the airbag connector to remove side airbag sensor.






INSTALLATION

CAUTION:
- Do not reuse the bolt and nut.
- Always use new bolts and nuts for them.

Install in the reverse order of removal.

Tightening torque: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)