Installation

Control Valve Body

INSTALLATION

1) Check the control valve body for dust and other foreign matter.
2) Install the control valve body to transmission by equally tightening the bolts.

Tightening torque:
8 Nm (0.8 kgf-m, 5.9 ft-lb)





3) Connect the control valve connector.





4) Attach the magnet at the specified position of the oil pan.





5) Apply liquid gasket to the oil pan.

Liquid gasket:
THREE BOND 1217B (Part No. K0877YA020) or equivalent





6) Install the oil pan by equally tightening the bolts.

Tightening torque:
5 Nm (0.5 kgf-m, 3.7 ft-lb)

7) Pour ATF through the oil charge pipe. A/T Fluid Replacement
8) Check the ATF level. A/T Fluid Inspection
9) Perform Clear Memory 2 operation.
10) Perform the diagnosis again. Programming and Relearning
11) Perform the inspection at the end of repair work, and make sure there is no faulty as below;
^ Excessive shift shock
^ Oil leakage from the transmission body, etc.
^ Occurrence of noise caused by interference etc.