P0767
DTC P0766 Shift solenoid D system (function/stuck OFF)DTC P0767 Shift solenoid D system (stuck ON)
DTC P0776 Pressure control solenoid B system (function/stuck OFF)
Circuit description
The transmission control computer ASSY detects the gear position based on signals from the transmission revolution sensor (NT) and the transmission revolution sensor (SP2). Then, the transmission control computer ASSY detects mechanical problems of related solenoid valve, valve body, or automatic transmission when the detected gear position differs from the commanded position.
Monitor description
This diagnostic code indicates "stuck OFF" of the shift solenoid valve S4, "stuck ON" of the shift solenoid valve S2, or a defect of the brake control valve. TCM switches ON/OFF of the shift solenoid valve to command shifting. If the gear position commanded by TCM is different from the actual gear position, TCM turns on MIL and records the diagnostic code.
MONITOR STRATEGY
TYPICAL ENABLING CONDITIONS
The following items are common to the all conditions below.
TYPICAL MALFUNCTION THRESHOLDS
P0766: Shift solenoid 4 (stuck OFF)
Compare the target gear specified by TCM and the gear ratio calculated from turbine shaft speed and vehicle speed.
When both of the following conditions are established: condition (A) and (B)
Condition (A)
Condition (B)
When both of the following conditions are established: condition (C) or (D)
Condition (C)
Condition (D)
P0767: Shift solenoid 4 (stuck ON)
Compare the target gear specified by TCM and the gear ratio calculated from turbine shaft speed and vehicle speed.
When both of the following conditions are established: condition (A) and (B)
Condition (A)
Condition (B)
P0776: Linear solenoid 2 (stuck ON)
Compare the target gear specified by TCM and the gear ratio calculated from turbine shaft speed and vehicle speed.
When both of the following conditions are established: condition (A) and (B)
Condition (A)
Condition (B)
When both of the following conditions are established: condition (C) or (D)
Condition (C)
Condition (D)
Circuit figure
Inspection steps
NOTE:
Gear position when the transmission 3 way solenoid ASSY (S4) is stuck OFF (Select lever in M position)
Gear position when the transmission 3 way solenoid ASSY (S4) is stuck ON (Select lever in M position)