Assembly
Front BumperASSEMBLY
1. Installation of the front bumper hole cover
1. Fit in the 4 tabs and install the front bumper hole cover.
2. Installation of the fog light cover LH
1. Fit in the 9 tabs and install the fog light cover LH.
3. Installation of the fog light cover RH
NOTE: Install using the same steps as the LH side.
4. Installation of the daytime running light unit LH
5. Installation of the daytime running light unit RH
NOTE: Install using the same steps as the LH side.
6. Installation of the fog light ASSY LH (when there are fog lights)
7. Installation of the fog light ASSY RH (when there are fog lights)
NOTE: Install using the same steps as the LH side.
8. Installation of the radiator grill (front panel) emblem
9. Installation of the front bumper beam COMPL (front bumper reinforcement SUB-ASSY)
1. Using 8 bolts, install the front bumper beam COMPL (front bumper reinforcement SUB-ASSY).
Standard value: T = 32 N.m {326 kgf.cm} {23.6 ft / lbf}
10. Installation of the high-pitched horn ASSY
11. Installation of the radiator cover plate
1. Using 6 clips, install the radiator cover plate.
12. Installation of the front bumper energy absorber
1. Install the front bumper energy absorber.
13. Installation of the front bumper stay bracket
1. Using the 3 bolts, install the front bumper stay bracket.
Standard value: T = 7.5 N.m {77 kgf.cm} {5.5 ft / lbf}
14. Installation of the front bumper cover LWR
1. Using 4 clips, install the front bumper cover LWR.
2. Install the 3 bolts.
Standard value: T = 7.5 N.m {77 kgf.cm} {5.5 ft / lbf}
15. Installation of the front bumper beam plate LH (front bumper reinforcement plate LH)
1. Using 2 clips, install the front bumper beam plate LH (front bumper reinforcement plate LH).
16. Installation of the front bumper beam plate RH (front bumper reinforcement plate RH)
NOTE: Install using the same steps as the LH side.
17. Installation of the front bumper side support LH
1. Fit in the 2 tabs and install the front bumper side support LH.
2. Install the screw.
18. Installation of the front bumper side support RH
NOTE: Install using the same steps as the LH side.