Disassembly
Rear BumperDISASSEMBLY
1. Removal of the back-up light ASSY
2. Removal of the rear bumper reinforcement NO. 2 (Installed on the LH side)
1. Using a clip remover, remove the 2 clips and remove the rear bumper reinforcement NO. 2.
3. Removal of the rear bumper reinforcement NO. 1 (Installed on the RH side)
NOTE: Remove using the same steps as the LH side.
4. Removal of the rear bumper side seal LH
1. Using a clip remover, remove the 4 clips and remove the rear bumper side seal LH.
5. Removal of the rear bumper side seal RH
NOTE: Remove using the same steps as the LH side.
6. Removal of the rear bumper side retainer LH
1. Remove the 2 screws, and remove the rear bumper side retainer LH.
7. Removal of the rear bumper side retainer RH
NOTE: Remove using the same steps as the LH side.
8. Removal of the rear bumper side bracket LH
1. Remove the 3 screws, and remove the rear bumper side bracket LH.
9. Removal of the rear bumper side bracket RH
NOTE: Remove using the same steps as the LH side.
10. Removal of the rear bumper beam COMPL (rear bumper stay)
1. Remove the 4 bolts and the 2 nuts, and remove the rear bumper beam COMPL (rear bumper stay).
11. Removal of the rear bumper bracket CTR (Installed on the LH side)
1. Using a clip remover, remove the clip, and remove the rear bumper bracket CTR.
12. Removal of the rear bumper bracket CTR (Installed on the RH side)
NOTE: Remove using the same steps as the LH side.