Assembly
Rear Seat ASSYASSEMBLY
1. Installation of the separate type rear seat cushion cover LH
1. Temporally install the separate type rear seat cushion cover LH to the separate type rear seat cushion pad LH.
2. Using hog ring pliers, attach 3 new hog rings.
CAUTION:
- Be careful not to contaminate or damage the separate type rear seat cushion cover LH.
- Align the centers of the fabric and the separate type rear seat cushion pad LH taking care not to make wrinkles, and attach the hog rings.
NOTE: If the separate type rear seat cushion cover LH for replacement is not provided with the retracting wire, reuse the original wire.
3. Using hog ring pliers and 40 new hog rings, install the separate type rear seat cushion cover LH to the rear seat cushion pad LH.
CAUTION:
- Be careful not to contaminate or damage the separate type rear seat cushion cover LH.
- Align the centers of the fabric and the separate type rear seat cushion pad LH taking care not to make wrinkles, and attach the hog rings.
2. Installation of the separate type rear seat cushion cover RH
NOTE: Install it in the same manner as the LH side.
3. Installation of the rear seat cushion bracket
1. Install the rear seat cushion bracket to the rear seat cushion ASSY LH with the screw.
NOTE: Perform the same procedures for the RH side.
4. Installation of the rear seat backrest lock release button
1. Rotate the rear seat backrest lock release buttons to the direction of the arrow in the figure, and install these 2 buttons to the rear seat backrest lock rod RH and LH respectively.
5. Installation of the rear seat backrest lock SUB-ASSY LH
1. Install the rear seat backrest lock SUB-ASSY LH to the rear seat backrest frame with 2 bolts.
Standard value: T = 24.5 N.m {250 kgf.cm} {18.0 ft.lbf}
6. Installation of the rear seat backrest lock SUB-ASSY RH
NOTE: Install it in the same manner as the LH side.
7. Installation of the rear seat backrest lock rod LH
1. As shown in the figure, insert the rear seat backrest lock rod LH.
2. Engage the claw and install the rear seat backrest lock rod LH.
8. Installation of the rear seat backrest lock rod LH
NOTE: Install it in the same manner as the LH side.
9. Installation of the bench type rear seat backrest cover
1. Temporally install the rear seat backrest cover to the bench type rear seat backrest pad.
2. Using hog ring pliers and 10 new hog rings, install the bench type rear seat backrest cover to the bench type rear seat backrest pad.
CAUTION:
- Be careful not to contaminate or damage the bench type rear seat backrest cover.
- Align the centers of the fabric and the bench type rear seat backrest pad taking care not to make wrinkles, and attach the hog rings.
NOTE: If the bench type rear seat backrest cover for replacement is not provided with the retracting wire, reuse the original wire.
10. Installation of the rear seat backrest cover with pad
1. Temporally install the rear seat backrest cover with pad to the rear seat backrest frame.
2. Engage 6 hooks.
3. Engage the hook.
4. Install the rear seat backrest cover with pad with 4 clips.
11. Installation of the rear seat backrest lock cover
1. Engage the guide and 3 claws, and install the rear seat backrest lock cover.
NOTE: Install the both brackets by following the same procedures.