Installation
Rear Seat ASSYINSTALLATION
1. Installation of the rear seat backrest lock striker SUB-ASSY LH
1. Install the rear seat backrest lock striker SUB-ASSY LH with 2 bolts.
2. Installation of the rear seat backrest lock striker SUB-ASSY RH
NOTE: Install it in the same manner as the LH side.
3. Installation of the rear seat backrest lock striker cover LH
1. Engage 3 clips and install the rear seat backrest lock striker cover LH.
4. Installation of the rear seat backrest lock striker cover RH
NOTE: Install it in the same manner as the LH side.
5. Installation of the package tray trim panel ASSY
6. Installation of the rear window side garnish LH
7. Installation of the rear window side garnish RH
NOTE: Install it in the same manner as the RH side.
8. Installation of the quarter trim lid LH
9. Installation of the quarter trim lid RH
NOTE: Install it in the same manner as the LH side.
10. Installation of the luggage compartment trim side cover LH
1. Engage 7 clips and install the luggage compartment trim side cover LH.
2. Install 3 clips.
11. Installation of the luggage compartment trim side cover RH
NOTE: Install it in the same manner as the LH side.
12. Installation of the front door scuff plate LH
13. Installation of the front door scuff plate RH
NOTE: Install it in the same manner as the LH side.
14. Installation of the front door opening trim weather strip LH
15. Installation of the front door opening trim weather strip RH
16. Installation of the bench type rear seat backrest ASSY
1. Carry in the bench type rear seat backrest ASSY to the vehicle.
CAUTION: Be careful not to damage the seat, the body exterior and interior.
2. Install the bench type rear seat backrest ASSY with 2 bolts.
Standard value: T = 33 N.m {337 kgf.cm} {24.3 ft.lbf}
3. Install the rear seat backrest cover with 3 clips.
17. Installation of the center console silencer No.1
1. Install the center console silencer No.1 with 2 clips.
18. Installation of the separate type rear seat cushion ASSY
1. Carry in the rear seat ASSY LH to the vehicle.
CAUTION: Be careful not to damage the seat, the body exterior and interior.
2. Engage the hook and temporally install the rear seat cushion ASSY LH.
3. Install the rear seat backrest ASSY LH with the bolt.
Standard value: T = 13 N.m {133 kgf.cm} {9.6 ft.lbf}
19. Installation of the separate type rear seat cushion ASSY RH
NOTE: Install it in the same manner as the LH side.