Removal
Rear Seat ASSYREMOVAL
1. Precautions
WARNING: Before starting the work, read the precautions for the SRS airbag system to make sure to properly perform the work.
CAUTION: After turning the ignition switch to OFF, it may be necessary to wait before disconnecting the battery terminal. Before performing the work, make sure to refer to the precautions for disconnecting the battery terminal.
2. Disconnection of the battery ground terminal
WARNING:
- Turn the ignition switch to OFF, disconnect the battery ground terminal, and then wait for 60 seconds before starting the work.
- The airbag and the pretensioner system are fitted with the backup power supply. Therefore, the airbag may be activated if you start the work within 60 seconds after disconnecting the battery ground terminal.
CAUTION: Open both the driver's and passenger's side windows until the door glasses come to the lowest position. Otherwise the molding may be damaged.
3. Removal of the separate type rear seat cushion ASSY
1. Remove the bolt.
2. Release the hook and remove the rear seat cushion ASSY LH.
CAUTION: Be careful not to damage the seat, the body exterior and interior.
4. Removal of the separate type rear seat cushion ASSY RH
NOTE: Remove it in the same manner as the LH side.
5. Removal of the center console silencer No.1
1. Remove 2 clips and remove the center console silencer No.1.
6. Removal of the bench type rear seat backrest ASSY
1. Remove 3 clips and turn over the rear seat backrest cover.
2. Remove 2 bolts and remove the bench type rear seat backrest ASSY.
CAUTION: Be careful not to damage the seat, the body exterior and interior.
7. Removal of the front door scuff plate LH
8. Removal of the front door scuff plate RH
NOTE: Remove it in the same manner as the LH side.
9. Removal of the front door opening trim weather strip LH
1. Remove the front door opening trim weather strip LH to the extent that the luggage compartment trim side cover LH can be removed.
10. Removal of the front door opening trim weather strip RH
NOTE: Remove it in the same manner as the LH side.
11. Removal of the luggage compartment trim side cover LH
1. Remove 3 clips.
2. Release 7 claws and remove the luggage compartment trim side cover LH.
WARNING: The curtain airbag sensor of the airbag system is fitted on the back side of the luggage compartment trim side cover. Make sure to refer to the precautions for the SRS airbag system before removing the luggage compartment trim side cover.
12. Removal of the luggage compartment trim side cover RH
NOTE: Remove it in the same manner as the LH side.
13. Removal of the quarter trim lid LH
14. Removal of the quarter trim lid RH
NOTE: Remove it in the same manner as the LH side.
15. Removal of the rear window side garnish LH
16. Removal of the rear window side garnish RH
NOTE: Remove it in the same manner as the LH side.
17. Removal of the package tray trim panel ASSY
18. Removal of the rear seat backrest lock striker cover LH
1. Remove 3 clips and remove the rear seat backrest lock striker cover LH.
19. Removal of the rear seat backrest lock striker cover RH
NOTE: Remove it in the same manner as the LH side.
20. Removal of the rear seat backrest lock striker SUB-ASSY LH
1. Remove 2 bolts and remove the rear seat backrest lock striker SUB-ASSY LH.
21. Removal of the rear seat backrest lock striker SUB-ASSY RH
NOTE: Remove it in the same manner as the LH side.