Current Data Display & Save
Current Data Display & Save1. Current Data Display
(1) Connect SSM3 to DLC3 with IG turned OFF.
(2) Turn IG ON and follow SSM3's screen to check the current data display.
CAUTION:
Factors including slight margins of error in measurement, differences in measurement environments, and vehicle's time-dependent change may significantly affect the computer data values. Thus it is difficult for the computer data to show reliable standard values (judgement values). Therefore, even if the value is within the standard range, an error may occur.
SSM3 screen: [ABS/VDC System]->[Current Data Display & Save]
