Brake Warning Light Remains On
Brake warning light remains ONDescription of functions
The skid control ECM is connected to the combination meter ASSY through the CAN communication.
When one of the following conditions is detected, the brake warning light illuminates.
^ The skid control ECM connector is disconnected from the skid control ECM.
^ The brake fluid level is insufficient.
^ The parking brake is being applied.
^ EBD control is not allowed.
Circuit figure
Inspection steps
CAUTION:
^ When the skid control computer (brake actuator ASSY) has been replaced, make sure to perform VSC centering. Programming and Relearning
^ Check the fuses in this circuit before troubleshooting.
