Installation

Installation

NOTE:
The procedures described below are for the LH side. Perform the same procedures both for the LH side and RH side, unless otherwise specified.

1. Installation of speed sensor FR LH
(1) Install the speed sensor FR LH with bolt.

CAUTION:
Do not let foreign matter stick to the installation part and the tip of the speed sensor FR LH.

Standard value:T=7.5Nm {77kgf-cm} {5.5ft-lbf}
(2) Attach 6 clamps.

CAUTION:
Do not attach the speed sensor FR LH with the sensor twisted.

(3) Connect the connector for the speed sensor FR LH.
2. Installation of front mudguard (front fender liner) LH
3. Installation of front tire
Standard value:T=120Nm {1224kgf-cm} {88.5ft-lbf}