Removal

Removal

1. Camshaft housing SUB-ASSY RH removal





2. Cylinder head SUB-ASSY removal
(1) Loosen the six cylinder head bolts equally in the order as shown in the figure.
(2) Tap the cylinder head SUB-ASSY with a plastic hammer to separate it from cylinder block.
(3) Remove the cylinder head SUB-ASSY.

CAUTION:
Be careful not to scratch the mating surface of cylinder head and cylinder block.

3. Cylinder head gasket removal
(1) Remove the cylinder head gasket.
4. Camshaft housing SUB-ASSY LH removal





5. Cylinder head LH removal
(1) Loosen the six cylinder head bolts equally in the order as shown in the figure.
(2) Tap the cylinder head LH with a plastic hammer to separate it from cylinder block.
(3) Remove the cylinder head LH.

CAUTION:
Be careful not to scratch the mating surface of cylinder head and cylinder block.

6. Cylinder head gasket NO. 2 removal
(1) Remove the cylinder head gasket NO. 2.