Installation

Installation

NOTE:
^ The following procedure indicates the LH side.
^ For the RH side, perform the same procedure as the LH side.

1. Installation of front axle hub & bearing ASSY LH
(1) Install the front axle hub & bearing ASSY to the steering knuckle with four bolts.
Standard value:T=65Nm {663kgf-cm} {1,459.99cm-lbf}
2. Inspection of front axle hub & bearing ASSY axial play Front
3. Inspection of front axle hub & bearing ASSY runout Front
4. Installation of speed sensor FR LH
(1) Install the speed sensor FR LH to the steering knuckle with a bolt.
Standard value:T=7.5Nm {77kgf-cm} {167.64cm-lbf}

CAUTION:
^ Do not damage the tip of the speed sensor when installing the speed sensor body.
^ Do not allow foreign matter to attach to the mounting surfaces.
^ Be careful not to twist the speed sensor wire during installation.

5. Installation of front disc
6. Installation of front disc brake caliper ASSY LH
7. Installation of front tire
Standard value:T=120Nm {1224kgf-cm} {2,697.48cm-lbf}
8. Inspection of test mode (speed sensor system)