Removal

Removal

NOTE:
^ The following procedure indicates the LH side.
^ For the RH side, perform the same procedure as the LH side.

1. Removal of rear tire





2. Disconnection of speed sensor RR LH
(1) Remove the bolt, and then remove the speed sensor.

CAUTION:
Keep the tip and mounting portion of the speed sensor RR free from foreign matter.





3. Removal of rear axle shaft nut LH
(1) Remove the crimp of the rear axle shaft nut LH.

CAUTION:
Completely release the crimp of the nut to avoid damage to the thread of the rear drive shaft ASSY LH.

(2) Remove the rear axle shaft nut using a socket wrench.

CAUTION:
Do not loosen the rear axle shaft nut LH with the rear axle loaded. Doing so may damage the rear axle hub and bearing ASSY LH.

4. Removal of rear drive shaft ASSY
5. Disconnection of rear disc brake caliper ASSY LH
6. Removal of rear disc
7. Removal of rear axle hub and bearing ASSY LH





(1) Remove 4 bolts, and remove the rear axle hub and bearing ASSY LH from the rear axle carrier.

NOTE:
Suspend the rear backing plate and the parking brake shoe with a string, etc.