Front

On-vehicle inspection

NOTE:
^ The following procedure indicates the LH side.
^ For the RH side, perform the same procedure as the LH side.

1. Removal of front tire
2. Removal of front disc brake caliper ASSY LH
3. Removal of front disc





4. Inspection of front axle hub & bearing ASSY axial play
(1) Inspect axial play of the bearing near the axle hub inner periphery (flange portion) using a dial gauge.
Limit: 0.05mm {0.04978mm}

CAUTION:
If it exceeds the limit, replace the front axle hub with a new part.





5. Inspection of front axle hub & bearing ASSY runout
(1) Inspect runout of the axle hub near the axle hub outer periphery using a dial gauge.
Limit: 0.05mm {0.04978mm}

CAUTION:
If it exceeds the limit, replace the front axle hub with a new part.

6. Installation of front disc
7. Installation of front disc brake caliper ASSY LH
8. Installation of front tire
Standard value:T=120Nm {1224kgf-cm} {2,697.48cm-lbf}