Installation

Installation

WARNING:
This service work includes a work which affects the SRS air bag system. Before starting the work, confirm the precautions for the SRS air bag system.

1. Installation of steering sensor
(1) Align 2 pins and 2 guides.
(2) Engage 6 claws, and then attach the steering sensor to the steering roll connector.

CAUTION:
Do not rotate the steering sensor until the steering sensor is attached to the spiral cable.

2. Installation of steering roll connector SUB-ASSY (with steering sensor)
3. Installation of steering column cover UPR
4. Installation of steering column cover LWR
5. Installation of steering column hole cover SUB-ASSY No.1 (with smart entry)
6. Front tire straight position check
7. Steering roll connector centering
8. Installation of steering wheel
9. Connection of battery ground terminal
Standard value:T=6.0Nm {61kgf-cm} {4.4ft-lbf}
10. Settings when removing/installing battery terminals
11. Centering of VSC (VDC) sensor Programming and Relearning
12. Air bag warning light check