Front Stabilizer Bar

Installation





1. Installation of front stabilizer bar bushing No. 1 (installed on LH side)
(1) Install the front stabilizer bar bushing No. 1 on the outer side of the vehicle than the ring section of the stabilizer bar FR.

CAUTION:
Install the front stabilizer bar bushing No. 1 with the arrow mark facing the front of the vehicle.

Captions in illustration





2. Installation of front stabilizer bar bushing No. 1 (installed on RH side)

NOTE:
Service the RH side in the same procedure as the LH side.





3. Installation of front stabilizer bracket No. 2 LH
(1) Using the bolt and nut, install the front stabilizer bracket No. 2 LH on the sub frame complete LH.
Standard value:Bolt
T=75Nm {765kgf-cm} {55.3ft-lbf}
Nut
T=25Nm {255kgf-cm} {18.4ft-lbf}
4. Installation of front stabilizer bracket No. 2 RH

NOTE:
Service the RH side in the same procedure as the LH side.

5. Installation of sub frame complete (body mounting cushion SUB-ASSY RR) LH
(1) Using four new bolts, install the stabilizer bar FR with the sub frame complete (body mounting cushion SUB-ASSY RR) LH.

Standard value:T=60Nm {612kgf-cm} {44.3ft-lbf}

6. Installation of sub frame complete (body mounting cushion SUB-ASSY RR) RH

NOTE:
Service the RH side in the same procedure as the LH side.

7. Installation of front stabilizer link ASSY LH
(1) Secure the stud bolt, and install the front stabilizer link ASSY LH to the stabilizer bar FR with a new nut.
Standard value:T=46Nm {469kgf-cm} {33.9ft-lbf}
(2) Secure the stud bolt, and install the front stabilizer link ASSY LH to the front shock absorber w/ coil spring with a new nut.
Standard value:T=46Nm {469kgf-cm} {33.9ft-lbf}
8. Installation of front stabilizer link ASSY RH

NOTE:
Service the RH side in the same procedure as the LH side.

9. Installation of undercover front side rear LH
10. Installation of undercover front side rear RH

NOTE:
Service the RH side in the same procedure as the LH side.

11. Installation of undercover COMPL T/M (engine undercover No. 2)
12. Installation of undercover front AL (engine undercover No. 1)
13. Installation of front tire
Standard value:T=120Nm {1224kgf-cm} {88.5ft-lbf}
14. Stabilization of vehicle
15. Inspection of front tires in straight-ahead position
16. Inspection and adjustment of front wheel alignment
17. Headlight adjustment