Data Monitor/Active Test

Data monitor/active test

1. Check with SSM3 (data monitor)

CAUTION:
Subtle phenomena such as breathing and rough idling need to be totally judged based on all items in the computer data by using a method of comparing with an equivalent vehicle after collecting data under the same condition.

(1) Use SSM3 to display the [Data monitor] screen according to the screen display and check the computer data.
SSM3 screen: [Transmission Control System] ->[Current Data Display & Save] ->[Normal sampling]

















SSM3 screen: [Integ. unit mode] ->[Work Support] ->[Normal sampling]





2. Check with SSM3 (active test)
(1) Use SSM3 to display the [System Operation Check Mode] screen according to the screen display and perform the active test.
SSM3 screen: [Transmission Control System] ->[Work Support] -> [System Operation Check Mode]





*: Warning diagnoses are not displayed in a list.

NOTE:
Perform the line pressure SOL active test with an oil pressure gauge.

SSM3 screen: [Integ. unit mode] ->[Work Support] ->[System Operation Check Mode]